What are stamping elbows?

Stamping elbow belongs to a kind of elbow, its production has a certain process flow, the forming process of stamping elbow is complex, need to be welded according to different materials and USES, under a certain pressure to form gradually. The forming of the stamping elbow needs to be carried out in accordance with a certain procedure, and the corresponding process should be strictly followed, otherwise the stamping elbow produced will have quality problems. According to the need, a circular annular shell can be cut into 4 90 degree elbow or 6 60 degree elbow or other specifications of the elbow, the process is suitable for the manufacture of the elbow in diameter and elbow diameter ratio greater than 1.5 of any specification of large pusher elbow, is currently the ideal method for the manufacture of large pusher elbow.

Stamping elbows

The raw material of stamping elbow is steel which is resistant to the corrosion of weak corrosive medium such as air, steam and water and chemical corrosive medium such as acid, alkali and salt. In practical application, the steel resistant to weak corrosion medium is often called stainless steel, and the steel resistant to chemical medium corrosion is called acid resistant steel. Due to the difference in chemical composition, the former is not necessarily resistant to chemical medium corrosion, while the latter is generally rust free. Stainless steel is one of the stronger materials in the metal materials used in construction. Because stainless steel has good corrosion resistance, it can make the structural parts to maintain the integrity of the engineering design for a long time. Therefore, the stamping elbow will not cause corrosion, pitting, corrosion or wear.