Stainless steel tee maintenance and maintenance

Stainless steel tees are used and maintained in a correct and reasonable manner, which can prolong the service life.

Stainless steel tee ball valve, stop valve, gate valve only when fully open or fully closed, do not allow to adjust the flow, so as to avoid erosion of the sealing surface and accelerate wear. The gate valve and the upper thread stop valve have a reverse sealing device, and the hand wheel is screwed to the uppermost position to prevent the medium from leaking from the packing.

ASME B16.9 ASTM A403 WP304L equal tees

Second, the long-term storage of stainless steel tees, should be checked on schedule, often the exposed surface must be kept clean, remove dirt, neatly stored in a place where the room is dry and dry, no stacking or open storage. The stainless steel tee is often kept dry and ventilated, the retainer is clean and tidy, and stored in an accurate storage method.

When installing, the stainless steel tee can be directly installed on the pipeline according to the connection mode, and installed according to the position used. Under normal circumstances, it can be installed at any position of the pipeline, but it is necessary to facilitate the inspection of the operation. Note that the flow direction of the stainless steel three-way medium should be upward from the longitudinal valve flap, and the stainless steel tee can only be installed horizontally. Stainless steel tees should pay attention to the sealing during installation to prevent leakage and affect the normal operation of the pipeline.