What is P235GH TC1 material?
P235GH is a German high temperature structural steel, number code 1.0345. European standard steel EN10028, carbon steel container plate. The general use of arc furnace and oxygen top blown converter smelting, high requirements of the use of furnace refining, electroslag remelting or vacuum treatment, vacuum induction furnace smelting or double vacuum smelting, appropriate heat treatment. The alloying element content is quite high. With good plasticity, toughness, cold bending and welding properties, suitable for manufacturing nuclear island steel containment, pressure vessels, equipment components. We can substitute our Q245R. Compared with ordinary steel, it has higher strength and toughness, cold bending and welding properties, physical properties, chemical properties, biocompatibility and process properties.
180 degree customized radius elbows P235GH TC1 EN 10253-2 Type A
Mechanical properties:
| Tensile strength | σ B350 ~480 MPa |
| Yield strength | σ S ≥215 MPa |
| Elongation | δ5≥ 25% |
| Impact absorption energy | Akv≥47 J |
| Brinell hardness | ≤105~140 HB100/3000 |
Chemical composition (mass fraction, %) :
| C | Si | Mn | P | S | Cr | Cu | Mo | Nb | Ni | Ti | V | N | Al |
| ≤ 0.16 | ≤0.35 | 0.60-1.20 | ≤0.025 | ≤0.010 | ≤0.30 | ≤0.30 | ≤ 0.08 | ≤ 0.020 | ≤0.30 | ≤0.03 | ≤0.02 | ≤0.012 | ≥0.020 |
Heat treatment:
| Hot working temperature | 1100~850 ℃ |
| Annealing temperature | 890~950 ℃ |
| Normalizing temperature | 520~580 ℃ |
180 degree customized radius elbow P235GH TC1 EN 10253-2 Type A
Before packaging and transportation, we will test the products ourselves, including theoretical parameters, appearance, marking and so on. If you need third-party testing, we can arrange it. Finally, we can provide you with the test report according to the test results. After you confirm, you can inform us of shipment.
Haihao Group has rich experience in producing P235GH material products. Please take A look at the 180 degree customized radius elbows of P235GH TC1 made of EN 10253-2 Type A recently produced by Haihao Group. The customer ordered a large number of customized elbows from us. After strict and standardized production, the finished products are shown in the picture, which is only a part of the products.
Dimension measurement of 180 degree customized radius elbows P235GH TC1 EN 10253-2 Type A
Haihao Group manufacture pipe fittings products for about 40 years, and our products sell well all over the world. If you have any questions, please contact us. We will be your better choice. Email:sales@haihaogroup.com